We all know that our packaging machine products need to […]
We all know that our packaging machine products need to be maintained in the daily use process, otherwise the machine is prone to failure, or the packaging efficiency decreases. For us to use the packaging machine better, daily maintenance is very necessary, then the packaging machine What should I pay attention to in daily maintenance? Let me give you a detailed introduction.
For ordinary styles, the packaging machine has compact appearance, practical functions, simple operation and economical price. The combination of new generation technologies meets the needs of daily life to a large extent. Traditional manual packaging has low efficiency and high degree of danger. When mechanical packaging replaces manual packaging, the overall efficiency is significantly improved.
The maintenance of the packaging machine by the packaging machine manufacturer is very important for long-term use.
1. The tank is equipped with a dipstick. Before starting the packaging machine, add oil to all positions, and set the specific filling time according to the temperature rise and the operating conditions of each bearing.
2. The worm gear box must store oil for a long time. If the oil level is high, the worm gear will seep into the oil. For continuous operation, the oil must be changed every three months. There is an oil plug at the bottom for draining oil.
3. When refueling the packaging machine, do not allow the oil to overflow from the cup, let alone run the oil around the packaging machine and on the ground. Oil can easily contaminate materials and affect product quality.
For the maintenance time of the packaging machine, regulations are also made:
1. Check the parts regularly, once a month, check whether the worm gear, worm, bolts on the lubricating block, bearings and other movable parts are flexible and whether they are worn. If an abnormality is found, repair it in time.
2. The packaging machine should be installed in a dry and clean environment, and should not work in an environment containing acids and other corrosive substances to the human body.
3. After using or stopping the operation, take out the drum, scrub the remaining powder in the bucket, and then install it for the next use.
4. If the packaging machine is not used for a long time, the whole must be wiped and cleaned. The smooth surface of each part should be smeared with anti-rust oil and covered with a tarp.
The above is the place where you need to pay attention to the daily maintenance of the packaging machine. Doing a good job in the daily maintenance of the packaging machine can effectively guarantee the operating efficiency of the machine and increase the service life of the machine.